A decent deck press for the money, but awkward, difficult to use, and fragile.
Awkward: You
need to tighten down wingnuts on six screw-head bolts which tend to spin if you don't hold them in
place with a screwdriver.
Difficult to use: The only way I have found to successfully use
this is to place the cards in a card box, and then put the box into the press, which tends to crush
the box. The press cannot be used on cards outside of the deck. Further, you need to tighten down
the six bolts in a rotating pattern. First tighten bolt A a little, then bolt B a little, the bolt
C, then D, E, and F. Then back to A and tighten it a little more, B more, C more, and so on. Then
back to A to tighten some more, and so on. Repeat until you have tightened "enough".
Fragile: if you over tighten, or tighten unevenly, the Plexiglas will crack.
Inexpensive and Cheap
Report this review
